8 elco j1/j4 type a right angle female for daughter cards series 8071 ?110 signal contacts in a 5 x 25 configuration ?center cavity with pre-alignment guides and keying option (uses 3 positions) ?see page 53 for keying options ?designed for gas tight press-fit installation ?supplied with or without upper ground return shield ?available with bottom pegs for secure p.c. mounting ?this connector can be used by itself or in conjunction with style b or c connectors ?used in positions j1/j4 of compactpci specification (daughter card) ?lower ground return shield available (see page 30) 27 8071 110 001 833 = type a right angle female without top shield, with pegs 27 8071 110 002 833 = type a right angle female without top shield, without pegs 27 8071 110 011 833 = type a right angle female with top shield, with pegs 27 8071 110 012 833 = type a right angle female with top shield, without pegs a b c d e 1 11 15 25 typ. 2.0 2x4=8.0 11.4 7.4 3.5 3.2 3.0 max. 0.95 typ. 2.0 2x10=20.0 -0.2 0 49.9 2x10=20.0 2x24=48.0 a b cd f e 12.8 12.25 6.0 9z21xx (20.9) a b c d f e (component side) recommended p.c. board layout 2.0 0.1 typ. 2x10=20.0 0.1 2x14=28.0 0.1 2x24=48.0 0.1 2x12=24.0 0.1 2.0 0.1 typ. hole 2- 2.0 0.1 max. 1.5 holes 135- 0.6 0.05 2x5=10.0 0.1 f f plating code contact area press-fit area under coat 833 0.1? min. au.65? pd/ni 1.5-3.0? solder nickel 1.2-3.0?
|